DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Overview
LED Mode Description
LAN 1-3
Solid green
A device (computer) is connected to the relevant port,
the connection is on.
Blinking green
Data transfer through the relevant LAN port.
No light
The cable is not connected to the relevant port.
WLAN 2.4G
WLAN 5G
Solid green
The router's WLAN of the relevant band is on.
Blinking green
Data transfer through the Wi-Fi network of the relevant
band.
No light
The router's WLAN of the relevant band is off.
WPS
Fast blinking green
Attempting to add a wireless device via the WPS
function.
Slow blinking green
The firmware is being updated.
No light
The WPS function is not in use.
In case the Power and WLAN 5G LEDs are solid green, and the WAN, LAN 1-3, WLAN 2.4G,
and WPS LEDs are fast blinking green at the same time, the device is in the emergency mode.
Power the device off and on. If the device is loaded in the emergency mode again, restore the
factory default settings via the hardware WPS/RST button.
Page 14 of 210
To Next Page
Loading...
