DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Overview
Back Panel
Figure 2. Back panel view.
Port Description
WPS/RST
A button to set up a wireless connection (the WPS function) and to
restore the factory default settings.
To use the WPS function: with the device turned on, push the button
and release. The WPS LED should start blinking fast.
To restore the factory defaults: with the device turned on, push the
button, hold it for 10 seconds, and then release the button.
LAN 1-3 3 Ethernet ports to connect computers or network devices.
WAN
A port to connect to a cable or DSL modem or to a private Ethernet
line (it is recommended to use the cable included in the delivery
package).
DC-IN Power connector.
The device is also equipped with four external non-detachable Wi-Fi antennas.
Page 15 of 210
To Next Page
Loading...
