DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Configuring via Web-based Interface
To set a schedule for a task which will be applied to a rule or setting of the firewall or will
enable/disable Wi-Fi connection or Wi-Fi filter, click the ADD button ( ) in the All Tasks
section.
Figure 142. The window for adding a schedule for a task.
In the opened window, in the System Time field, the system time of the device is displayed. You
can select the simplified mode of the schedule. To do this, select the Simplified mode value from
the Mode drop-down list and specify the following parameters:
Parameter Description
Perform task on
schedule
Move the switch to the right to enable the schedule.
Move the switch to the left to disable the schedule.
Page 189 of 210
To Next Page
Loading...
