DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Configuring via Web-based Interface
If you need to configure a connection via VLAN, click the ADVANCED MODE button.
Figure 53. The Multimedia Devices Connection Wizard. The advanced mode.
In the WAN section, click the Add icon ( ).
Figure 54. Adding a connection.
In the opened window, specify a name of the connection for easier identification in the Name field
(you can specify any name). Specify the VLAN ID provided by your ISP and click the SAVE
button.
Then in the LAN section, from the Bridged with drop-down list of the element corresponding to
the LAN port to which the additional device is connected, select the created connection. Click the
APPLY button.
!
The selected port cannot use the default connection to access the Internet.
To deselect the port in the simplified mode, left-click the selected element (the frame will
disappear) and click the APPLY button.
Page 64 of 210
To Next Page
Loading...
