6D-Link Media Converter Series
Section 1 - Product Overview
LED Indicators
Each media converter features front panel display LEDs that give you instant feedback on the status of your device.
LEDs Status Description
1 PWR (Power)
On The device is powered on
O The device is powered o
2 LINK/ACT (Link and Activity)
On The link is active
Blinking Transmitting/receiving data
O The link is not active
3
FDX/Col
(10/100 Mbps models only)
On The device is using full-duplex mode
Blinking Indicates a collision of data when using half-duplex mode
O The device is using half-duplex
4
100 (Speed)
(10/100 Mbps models only)
On The link has negotiated at 100 Mbps
O The link has negotiated at 10 Mbps
1
1
2
2
3
4
10/100 Mbps series LEDs
1000 Mbps series LEDs
To Next Page
Loading...
