D-Link DMG-112A - TROUBLESHOOTING; RESETTING TO FACTORY DEFAULTS; CONNECTING WITH FORGOTTEN WI-FI CREDENTIALS

DMG -112A
9
ENGLISH
TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
1. HOW DO I RESET MY DMG-112A WIRELESS N 300M REPEATER TO FACTORY DEFAULT
SETTINGS?
- Ensure the product is powered on.
- Press and hold the WPS button for 6 seconds or longer until the bottom white LED begins to
ash.
Note: Resetting the product to the factory default will erase the current conguration
settings. The default Wi-Fi network name (SSID) is dlink-112A-z with no password required.
2. HOW DO I CONNECT A PC OR OTHER DEVICE TO THE DMG-112A IF I HAVE FORGOTTEN MY WI-
FI NETWORK NAME (SSID) OR WI-FI PASSWORD?
- If you haven't changed the extended Wi-Fi network's settings, you can use the default Wi-Fi
network name (SSID) dlink-112A-z with no password required.
- If you did change the network name (SSID) or Wi-Fi password and you deleted the Wi-Fi
Prole Card saved on your device, you must reset the device as described in Question 1
above.