15
IP Address: The default IP address is 192.168.0.10
Subnet Mask: The default subnet mask is 255.255.255.0
Default Gateway: Enter the IP address of the default gateway (router).
IP Assignment:
Manually Assign: Select this option when you manually input the IP
address in the field above.
Assign Automatically Using:
RARP: Reverse Address Resolution Protocol is a TCP/IP
protocol that assigns an IP address using MAC address
information.
AppleTalk Zone: Enter an asterisk.
Chooser Name: Enter the printer name.
Printer Type: Enter the printer type.
PostScript Level: Enter the PostScript level.
Font Group: Enter the font group.
Save: Click Save to save the changes.
TCP/IP Protocol
Network (continued)
Using the Web Configuration (continued)
BOOTP: Bootstrap Protocol can provide an IP address to
the print server.
DHCP: Dynamic Host Configuration Protocol automati-
cally assigns an IP address to the print server.
SNMP Community 1-3: Simple Network Management Protocol is a set of
protocols for managing complex networks.
Name: Enter a name.
Access Right: Select from the pull-down menu. Read Only or
Read/Write.
Net BEUI Protocol
Net Bios Extended User Interface is an enhanced version of the NetBios protocol
that is used by many LAN managing systems.
Workgroup: Enter a name for the Workgroup.
Maximum Limitation: Enter the maximum number of connected stations.
AppleTalk Protocol
To Next Page
Loading...
