Need help?Do you have a question about the D-Link DP-301P+ and is the answer not in the manual?
General| Networking standards | - |
|---|---|
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Network connection type | Ethernet LAN |
| Copper ethernet cabling technology | 100BASE-TX, 10BASE-T |
| Supported network protocols | TCP/IP, NetBEUI, AppleTalk, LPR, SMB, IPP |
| DC-in jack | Yes |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Flash memory | 2 MB |
| Internal memory | 8 MB |
| Internal | No |
| Product color | Gray |
| LED indicators | Power |
| Windows operating systems supported | Windows 2000, Windows 2000 Professional, Windows 95, Windows 98, Windows 98SE, Windows ME, Windows NT, Windows XP Home, Windows XP Home x64, Windows XP Professional |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Safety | UL, LVD |
| Certification | FCC B, CE B, C-Tick |
| Cabling technology | 10/100Base-T(X) |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 52.6 mm |
|---|---|
| Width | 85.6 mm |
| Height | 25.9 mm |
Lists the hardware and software needed for the print server.
Describes the parallel and network ports on the print server.
Explains the RJ-45 LAN port for Ethernet connection.
Details the DC power input connector on the rear panel.
Describes the function of the ACT, LPT, and Power LEDs.
Describes the parallel port for printer connection.
Step-by-step guide for physically installing the print server.
Explains the automatic self-test performed when the server powers on.
Explains the circuit tests and error codes indicated by LPT LED flashes.
Explains the System Status and Printer Status displayed on the Home tab.
Details settings for Server Name, Location, Password, and Port.
Covers TCP/IP, NetBEUI, and AppleTalk protocol settings.
Explains Print Test and Factory Reset functions.
Provides information on accessing D-Link's support website.
Steps to enable AppleTalk printing on the print server for Mac OS 9.
Guide to setting up a network using the Windows XP wizard.
Steps to name your computer and set the workgroup in Windows XP.
Steps to find the computer's IP address using the network connection status.
Guide to manually setting a static IP address for Windows XP/2000.
Details the 1-year limited warranty for hardware and software.
Details the 90-day warranty for software.
Lists conditions under which the warranty does not apply.
Lists specific exclusions from the limited warranty coverage.
Disclaims all warranties other than the express limited warranty.
Limits D-Link's liability for damages related to the product.
States governing law and information on trademarks and copyright.
Details FCC compliance and radio interference guidelines.
To Next Page
