D-Link DPH-150SE - Other Functions; Auto Handdown; Ban Anonymous Call; Dial Plan

21
/
68
state of an object changes, the corresponding LED will change.
5. Other Functions
5.1 Auto Handdown
1. Press Menu ->Features-> Enter->Auto Handdown-> Enter.
2. Set the Mode Enable through the navigation key, then set Time, unit is minute, then press
Save.
3. When the call ends, after the time that you have set, the phone will back to the idle
interface.
5.2 Ban Anonymous Call
1. Press Menu ->Features-> Enter->Ban Anonymous Call-> Enter.
2. Choose which sip you want to enable Ban Anonymous Call, and then press Enter, choose
Enabled or Disabled through navigation key.
3. If you choose Enabled, the others can’t call the phone by anonymous. If you choose
Disabled, the others can call the phone by anonymous.
5.3 Dial Plan
1. Press Menu ->Features-> Enter->Dial Plan-> Enter.
2. The following plans you can set: Press # to Send, Timeout to Send, Timeout, Fixed
Length Number, Press # to Do BXFER, BXFER On Onhook, AXFER On Onhook. You can
enable or disable each dial plan.
5.4 Dial Peer
1. Press Menu ->Features-> Enter->Dial Peer-> Enter.
2. Press Add to enter the Edit interface, and then input some information. For example:
Number: 1T, Dest.: 0.0.0.0, Port: 5060, Mode: SIP, Alisa: all:3333, Suffix: no suffix, Del
Len: 0. Then press Save. Then press Save.
3. Input 1+number (1234) in the dial interface, you can dial out 3333. You can refer to
8.3.3.4 DIAL PEER.