D-Link DPH-150SE - Audio

53
/
68
8.3.4.2 Audio
In this page, you can configure voice codec, input/output volume and so on.
Audio Setting
Field Name Explanation
First Codec The first codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB
Second Codec
The second codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB,
None
Third Codec
The third codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB,
None
Fourth Codec
The forth codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB,
None
Fifth Codec
The third codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB,
None
Sixth Codec
The forth codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB,
None
Onhook Time Specify the least reflection time of Hand down, the default is 200ms.
Tone Standard Configure tone standard area.
Handset Volume Set the Headset calls the volume level.
Default Ring Type Ring Sound – There are 9 standard types and 3 User types.
Speakerphone
Volume
Set the speaker calls the volume level.
Headset Ring Set the Headset ring the volume grade.