78
6.10.5. Configuration
Save: save device current configuration to local file
Restore: upload a local file to restore as device configuration
Factory Default: set device configuration to factory default setting
View Current Configuration: open a static page to show current configuration of system.
6.10.6. Firmware Update
There are two ways to update firmware by web. We can update a firmware directly through web or use auto provision. If we choose auto provision, we need install
http server or TFTP server on host.
Note:
We recommend user should reboot their IP Phone before Firmware Update whatever update a firmware directly through web or use auto provision.
Firmware File: firmware to update
Firmware Update at each Boot: enable or disable auto provision at each phone boot
Firmware Update Periodically: enable or disable periodical auto provision
To Next Page
Loading...
