v
Issue 1 February 2011
............................................................................................................................................................................................................................................................
About this document
Purpose
The purpose of the User Manual is to provide installation information, procedures for
installation, service activation and system reconfiguration for the DSL-6300V VDSL2
Bridge. Additionally the User Manual contains status indicators and troubleshooting
information and a comprehensive description of safety guidelines.
Reason for revision
This version 1.0 of the User Manual is the first issue.
Intended audience
The intended audience of the User Manual primarily is for individuals who install,
configure and maintain this customer premises equipment (CPE) and in addition
responsible for the supervision of transmission operation.
Supported systems
For theDSL-6300V VDSL2 gateway operation as described in this manual, a specific
hardware consists of the following components is required:
• One DSL-6300V VDSL2 Bridge
• One standard telephone cable
• One category 5 UTP network cable
• One power adapter
Safety information
Important!
The following information lists the safety reminders for installation and
maintenance personnel.
Read all instructions before attempting to unpack, install, operate, or connect power to
this CPE. Please remember the following when you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of fire, electrical shock
and injury.
• To prevent fire or shock hazard, do not expose the CPE to rain, moisture or install
this equipment near water. Never spill any form of liquid on or into this product.
To Next Page
Loading...
Need help?
General
