D-Link DSR-Series User Manual 175
Section 9 - Maintenance
Path: Maintenance > Management > SNMP > Access Control List
To edit, delete, or create a new access control entry:
1. Click Maintenance > Management > SNMP > Access Control List tab.
Access Control
2. Right-click an entry and select either Edit or Delete. To add a new trap, click Add Access Control.
3. Complete the elds from the table below and click Save.
Field Description
IP Address The IP Address of the SNMP agent.
Subnet Mask The network mask used to determine the list of allowed SNMP managers.
Community
The community string to which the agent belongs. Most agents are congured to listen for traps in the
Public community.
Access Type Access will be either read only (ROcommunity) or read-write (RWcommunity).
Save Click to save and activate your settings.
To Next Page
Loading...
