D-Link DSR-1000N User Manual

D-Link DSR-Series User Manual iv
Static electricity can harm delicate components inside your system. To prevent static damage, discharge static
electricity from your body before you touch any of the electronic components, such as the microprocessor. You can
do so by periodically touching an unpainted metal surface on the chassis.
You can also take the following steps to prevent damage from electrostatic discharge (ESD):
1. When unpacking a static-sensitive component from its shipping carton, do not remove the
component from the antistatic packing material until you are ready to install the component
in your system. Just before unwrapping the antistatic packaging, be sure to discharge static
electricity from your body.
2. When transporting a sensitive component, rst place it in an antistatic container or package.
3. Handle all sensitive components in a static-safe area. If possible, use antistatic oor pads,
workbench pads and an antistatic grounding strap.
Protecting Against Electrostatic Discharge
Preface

D-Link DSR-1000N Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Frequency range	2.4GHz
xDSL connection	No
Dimensions (WxDxH)	180 x 280 x 44 mm
USB ports quantity	2
Firewall security	RIPv1, RIP v2, OSPF
Security algorithms	WPA, WPA-PSK, WPA2-PSK
MAC address filtering	-
Ethernet LAN (RJ-45) ports	4
Safety	cUL, LVD (EN60950-1)
Certification	FCC B, CE B, VCCI, C-Tick, IC
Mean time between failures (MTBF)	260000 h
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Product color	Black

Weight and Dimensions

Weight	- g