D-Link DSR-1000N - Reset to Factory Default Settings

D-Link DSR-Series User Manual 177
Section 9 - Maintenance
Path: Maintenance > Management > Diagnostics > Network Tools
As part of the diagnostics functions on the router, you can ping an IP address or domain name. You can use this
function to test connectivity between the router and another device on the network or the Internet.
1. Click Maintenance > Diagnostics > Network Tools tab.
Diagnostics
Ping an IP Address/Domain Name
2. Under Command Output for Ping and Traceroute, in the IP Address/Domain Name eld, enter an IP
address or domain name.
3. Click Ping. The results will appear in the Command Output display below.