PRODUCT
SETUP
QUICK INSTALLATION
1. Connect the power adapter to the power connector on
the back of the DUB-1340, then plug the power adapter
into a power outlet.
2. Connect the USB 3.0 Micro-B plug(the smaller plug)
of the included USB 3.0 cable to the connector on the
back of the DUB-1340.
3. Connect the USB 3.0 Standard-A plug(the larger plug)
of the included USB 3.0 cable to the USB 3.0 port on
your computer.
Alternatively, you may use a USB 2.0 Standard-A to
USB 2.0 Micro-B cable to connect the DUB-1340 to
your computer. In this case, you will only be able to use
the DUB-1340 as a USB 2.0 hub.
Note: Please make sure that the power draw requirements
for devices connected to the DUB-1340 do not
exceed 2.1 A for a single port, or 3.2 A total for all
connected devices.
To Next Page
Loading...
