D-Link DWL-122 - Networking Basics - Static IP Configuration Details; Inputting IP, Subnet Mask, and DNS Settings

43
IP Address:
e.g., 192.168.0.2
Subnet Mask:
255.255.255.0
Default Gateway:
In the window below,
select Use the following
IP address. Input your
IP address and subnet
mask. (The IP addresses
on your network must be
within the same range. For
example, if one computer
has an IP address of
192.168.0.2, the other
computers should have
IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4.
The subnet mask must be the same for all the computers on the
Click OK
Select Use the following
DNS server addresses.
Enter the LAN IP address
of the Wireless Router.
(D-Link wireless routers
have a LAN IP address of
192.168.0.1)
Enter the LAN IP address
of the wireless router.
(D-Link wireless routers
have a LAN IP address of
192.168.0.1)
Networking Basics (continued)
Assigning a Static IP Address
in Windows XP/2000
Click on Internet
Protocol (TCP/IP).
Click Properties.







