EasyManua.ls Logo

D-Link DWL-122 - Networking Basics - Wireless Connection Test; Testing Connectivity Using the Ping Command

D-Link DWL-122
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
Networking Basics (continued)
Checking the Wireless Connection by
Pinging in Windows XP/2000*
Checking the Wireless Connection by
Pinging in Windows Me/98*
Go to Start > Run >
type cmd. A window
similar to this one
will appear. Type
ping xxx.xxx.xxx.
xxx, where xxx is
the IP address of
the wireless router or
access point. A good
wireless connection
will show four replies
from the wireless
point, as shown.
Go to Start > Run
> type command.
A window similar
to this will appear.
Type ping xxx.xxx.
xxx.xxx where xxx
is the IP address
of the wireless
router or access
point. A good wire-
less connection will
show four replies
from the wireless
router or access
point, as shown.
* The IP addresses in these illustrations are examples only. The actual IP addresses
that you ping may be different than those displayed here.

Other manuals for D-Link DWL-122

Related product manuals