D-Link DWL-650 - IP Address Configuration; Microsoft Windows XP; Static IP Address Setup

IP Address Configuration
To connect to a network, make sure
the proper network settings are
configured for DWL-650.
For Microsoft Windows XP:
Go to Start > right click on
My Network Places >
select Properties > Double-click on
the Network Connection associated
with the DWL-650.
Click Internet Protocol (TCP/IP)
Click Properties
Select Obtain an IP address
automatically (if the Wireless Router or
Access Point has DHCP server enabled)
Select Obtain DNS server
address automatically
Click OK
Select Use the following IP address (if
the Wireless Router or Access Point does
not have DHCP server enabled
Click OK
IP address: 192.168.0.51
Subnet mask: 255.255.2
55.0
Input a static IP address in the same
range as the Wireless Router or
Access Point.
Your Internet service provider provides
preferred DNS server information.
Static IP address setup