Getting Help on Commands at the CLI
D-Link Unified Wired and Wireless Access System
November 7, 2011 Page 18
D-Link UAP CLI Command Reference
mcs-index MCS Index of radios
policy-map Creates a Diffserv policy.
qos-mac-acl Create MAC-ACL.
scheduler-profile Scheduler Profile
scheduler-profile-list Scheduler Profile List
snmp-group SNMP user groups
snmp-target SNMPv3 targets to receive traps
snmp-user SNMPv3 users
snmp-view SNMP MIB views
supported-rate Supported rates of radios
traphost Destination host for SNMP trap
WLAN-AP# remove
Example 3: Type the following:
get system v Tab.
This will result in completion with the only matching property, get system version. Press Enter to display
the output results of the command.
To Next Page
Loading...
