D-Link DWL-G122 - Networking Basics and IP Configuration; Checking Your IP Address

48D-Link DWL-G122 User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP address

settings should be set to obtain an IP address from a DHCP server (i.e. router) automatically. To verify your IP address,
please follow the steps below.
Windows
®
XP/2000 Users
 Start > Run. In the run box type
cmd and click OK.
 
ipconfig and press Enter.
 
adapter.
Windows Vista
™
Users
 Start >  > Accessories > Command Prompt. You may
need administrative access to run this application.
 
application, select Yes, OK, or Continue.
 ipconfig and press Enter.
 
adapter.

may block a DHCP request on newly installed adapters.