7D-Link DWL-G122 User Manual
Section 2 - Installation
Getting Started
Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in
device manager before installing your D-Link adapter. Also, if you have previously installed another wireless adapter,
please make sure any software is uninstalled.
Remove Existing Installations
If you’ve installed a different manufacture’s adapter or a different model D-Link adapter, make sure the software is
to use multiple adapters at different times, make sure the utilities are not set to load when your computer boots up.
Windows
®
XP users may use the built-in wireless utility for all adapters.
Windows
®
™
Start > Control Panel > .
Windows
®
Start > > Control Panel > .
To Next Page
Loading...
