D-Link DWL-G122 - Statically Assigning an IP Address

49D-Link DWL-G122 User Manual
Appendix B - Networking Basics
Statically Assign an IP address


Windows
®
XP/2000 Users
 Windows
®
XP - Click on Start > Control Panel. Make sure you are in Classic View. Double-click on the Network Connections
icon.
Windows
®
2000 – From the desktop, right-click My Network Places > Properties.
  which represents your D-Link wireless network adapter (or other adapter) which will
be connected to your router.
 Internet Protocol (TCP/IP) and click Properties.
  and enter an IP address that is on the same subnet
as your network or LAN IP address on your router.
 If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is not
in use on the network.
  the same as the LAN IP address of your router or gateway.
 Primary DNS the same as the LAN IP address of your router or gateway.
 Secondary DNS is optional (you may enter a DNS server from your ISP).
 OK to save your settings.