D-Link DWL-G122 - Windows Vista Users

50D-Link DWL-G122 User Manual
Appendix B - Networking Basics
Windows Vista
™
Users
 Start > Control Panel. Make sure you are in Classic View. Double-click on the  icon. Along
the left panel in the window, click on .
  which represents your D-Link wireless network adapter which will be connected to your
network.
 Internet Protocol Version 4 (TCP /IPv4) and click Properties.
  and enter an IP address that is on
the same subnet as your network or LAN IP address on your router or
network.
 If the router’s LAN IP address is 192.168.0.1, make your IP
address 192.168.0.X where X is a number between 2 and 99. Make sure
that the number you choose is not in use on the network.
  the same as the LAN IP address of your router or
gateway.
  Primary DNS the same as the LAN IP address of your router or
gateway.
 Secondary DNS is optional (you may enter a DNS server from your
ISP).
 OK to save your settings.