54
firewall schedules to work.
Enable Daylight Saving: If supported by the NTP servers for your
region, you can check Automatically Adjust for Daylight Savings Time.
NTP Server1: The NTP server to sync. Default is 0.us.pool.ntp.org
NTP Server2: The second NTP server to sync in case the first one does
not respond. Default is 1.us.pool.ntp.org.
NTP Server3: The third NTP server to sync in case the first and second
does not respond. Default is 2.us.pool.ntp.org.
Configure date and time manually: Select this if you would like to set
time manually.
Click Apply to apply the changes. Or click Reset to undo your
configurations.
To Next Page
Loading...
