Do you have a question about the D-Link DWP-1010 and is the answer not in the manual?
Plug and Play | Yes |
---|---|
Networking standards | IEEE 802.3at, IEEE 802.3i, IEEE 802.3u |
Ethernet LAN data rates | 1000, 2500 Mbit/s |
Ethernet LAN interface type | Multi-Gigabit Ethernet |
Product type | - |
Product color | White |
LED indicators | Status |
International Protection (IP) code | IP67 |
Power source type | PoE |
4G standard | LTE |
SIM card type | MicroSIM |
Mobile network generation | 5G |
Antennas quantity | 6 |
Storage temperature (T-T) | -40 - 70 °C |
Operating temperature (T-T) | -30 - 60 °C |
Operating relative humidity (H-H) | 10 - 95 % |
Sustainability certificates | CE |
USB port | No |
Ethernet LAN (RJ-45) ports | 1 |
WLAN data transfer rate (max) | - Mbit/s |
Cables included | AC, LAN (RJ-45) |
Compatible operating systems | Andorid, iOS Windows, Mac, Linux |
Depth | 144.8 mm |
---|---|
Width | 105.4 mm |
Height | 210.4 mm |
Weight | 760 g |
Details changes made to the manual.
Lists protected company and product names.
Lists all items included in the product box.
Specifies necessary hardware and software for operation.
Provides a general overview of the product's purpose and features.
Describes the ports and buttons on the bottom of the device.
Details the indicators and buttons on the side of the device.
Step-by-step guide for inserting the SIM card.
Instructions for connecting the network cable.
Steps to connect the CPE to the local network and internet.
Highlights important safety notices and potential hazards.
Initial steps for accessing and configuring the device.
Overview of device status, network, and modem information.
Information regarding the cellular signal strength and quality.
Configuration options for network connectivity and device operation modes.
Parameters for configuring the 5G/LTE cellular connection.
Settings for the Ethernet port and DHCP server.
Configuration for network traffic redirection and IP address assignment.
Settings for Dynamic DNS service setup.
Settings for date, time, and time zone synchronization.
Options to change the interface language and view device details.
Settings for scheduling device operations.
Specific settings for the 2.4GHz WiFi band.
Process for updating the device's firmware.
Settings for changing user passwords and managing MMI.
Options for restarting, restoring defaults, and managing Telnet access.
Settings for managing the device remotely.
Configuration and status of SMS features and message summaries.
Functionality for composing and viewing SMS messages.
Detailed list of hardware and software specifications.
Lists supported radio frequencies and their output power.
Statement of compliance with EU directives.
Important safety precautions to protect users and the product.
Guidelines for environmentally responsible product end-of-life management.