D-Link DWP-1010 User Manual

Section 3 – Configuration
D-Link DWP-1010 User Manual 10
If you lose or forget the admin password, the ONLY remedy is to recover the device to its factory default
settings by long pressing the Reset button. The reset procedure will erase the entire device configuration.
Once you have successfully logged in, you will see the Home page. On this page, you can view information
about your LAN network connection, cellular connection, and signal information.
Select a configuration category from the menu panel and click the corresponding function tabs to go to the
appropriate configuration page.
On each page, enter the desired settings and click Apply when you are done with your changes.

D-Link DWP-1010 Specifications

General

Plug and Play	Yes
Networking standards	IEEE 802.3at, IEEE 802.3i, IEEE 802.3u
Ethernet LAN data rates	1000, 2500 Mbit/s
Ethernet LAN interface type	Multi-Gigabit Ethernet
Product type	-
Product color	White
LED indicators	Status
International Protection (IP) code	IP67
Power source type	PoE
4G standard	LTE
SIM card type	MicroSIM
Mobile network generation	5G
Antennas quantity	6
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	10 - 95 %
Sustainability certificates	CE
USB port	No
Ethernet LAN (RJ-45) ports	1
WLAN data transfer rate (max)	- Mbit/s
Cables included	AC, LAN (RJ-45)
Compatible operating systems	Andorid, iOS Windows, Mac, Linux

Weight and Dimensions

Depth	144.8 mm
Width	105.4 mm
Height	210.4 mm
Weight	760 g