D-Link DWP-1010 User Manual

Section 1 – Product Overview
D-Link DWP-1010 User Manual 1
Package Contents
 DWP-1010 5G/LTE Outdoor CPE
 PoE Injector (53Vdc, 0.6A Power Supply)
 AC Power Cable
 Pole Mount Kit - Stainless Clamp x 2
 Wall Mount Kit - Screw Anchor (M6x25mm) / Screws (M3.5 X16mm)
 RJ45 Cable (10m) for connection between the modem and the PoE Injector
 Warranty Card
 GPL Sheet
If any of the above items are missing, please contact your reseller.
System Requirements
 Computer with Windows, Macintosh, or Linux-based operating system with an installed Ethernet
adapter.
 Java-enabled browser such as Internet Explorer 11+, Chrome 94 or higher, Firefox 93 or higher, Safari
15 or higher, or Edge 94 or higher.
 An active 5G/LTE service plan from a compatible carrier*.
*Subject to services and service terms of your carrier

D-Link DWP-1010 Specifications

General

Plug and Play	Yes
Networking standards	IEEE 802.3at, IEEE 802.3i, IEEE 802.3u
Ethernet LAN data rates	1000, 2500 Mbit/s
Ethernet LAN interface type	Multi-Gigabit Ethernet
Product type	-
Product color	White
LED indicators	Status
International Protection (IP) code	IP67
Power source type	PoE
4G standard	LTE
SIM card type	MicroSIM
Mobile network generation	5G
Antennas quantity	6
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	10 - 95 %
Sustainability certificates	CE
USB port	No
Ethernet LAN (RJ-45) ports	1
WLAN data transfer rate (max)	- Mbit/s
Cables included	AC, LAN (RJ-45)
Compatible operating systems	Andorid, iOS Windows, Mac, Linux

Weight and Dimensions

Depth	144.8 mm
Width	105.4 mm
Height	210.4 mm
Weight	760 g