D-Link DWP-1010 User Manual

Section 3 – Configuration
D-Link DWP-1010 User Manual 9
Configuration
Getting Started
To access the configuration utility, open a web browser such as Internet Explorer and enter the address of
the router (192.168.100.1 by default).
To log in to the configuration utility, enter the default username admin and the default 8-digit password
printed on the Quick Installation Guide.
Notes:
1. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.
2. If you failed the login attempt for 3 times, you will be temporarily locked before log in fields are available
again.
If this is the first time logging into the device, the system will prompt you to set a new password. Note that
the password must be at least 10 characters and contain a mix of letters and numbers.

D-Link DWP-1010 Specifications

General

Plug and Play	Yes
Networking standards	IEEE 802.3at, IEEE 802.3i, IEEE 802.3u
Ethernet LAN data rates	1000, 2500 Mbit/s
Ethernet LAN interface type	Multi-Gigabit Ethernet
Product type	-
Product color	White
LED indicators	Status
International Protection (IP) code	IP67
Power source type	PoE
4G standard	LTE
SIM card type	MicroSIM
Mobile network generation	5G
Antennas quantity	6
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	10 - 95 %
Sustainability certificates	CE
USB port	No
Ethernet LAN (RJ-45) ports	1
WLAN data transfer rate (max)	- Mbit/s
Cables included	AC, LAN (RJ-45)
Compatible operating systems	Andorid, iOS Windows, Mac, Linux

Weight and Dimensions

Depth	144.8 mm
Width	105.4 mm
Height	210.4 mm
Weight	760 g