D-Link DWP-1010 User Manual

Section 2 – Installation
D-Link DWP-1010 User Manual 8
Maintenance Notice
Warning
Hot Surface Caution
CAUTION: The surface temperature of the enclosure can be very high. Especially after operating for an
extended period of time, or when isntalled in an enclosed space without air circulation, or in a high ambient
temperature location.
DO NOT touch the surface while servicing.
 Only use the power cable that comes with the package.
 Over voltage is dangerous and may damage the product.
 Do not open or repair the case yourself. If the product is too hot,
turn off the power immediately and have it repaired at a
qualified service center.
 The 5G/LTE Outdoor CPE shall not be installed in the same area
with PoE injector during the environment temperature is above
50°C.
!
Attention

D-Link DWP-1010 Specifications

General

Plug and Play	Yes
Networking standards	IEEE 802.3at, IEEE 802.3i, IEEE 802.3u
Ethernet LAN data rates	1000, 2500 Mbit/s
Ethernet LAN interface type	Multi-Gigabit Ethernet
Product type	-
Product color	White
LED indicators	Status
International Protection (IP) code	IP67
Power source type	PoE
4G standard	LTE
SIM card type	MicroSIM
Mobile network generation	5G
Antennas quantity	6
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	10 - 95 %
Sustainability certificates	CE
USB port	No
Ethernet LAN (RJ-45) ports	1
WLAN data transfer rate (max)	- Mbit/s
Cables included	AC, LAN (RJ-45)
Compatible operating systems	Andorid, iOS Windows, Mac, Linux

Weight and Dimensions

Depth	144.8 mm
Width	105.4 mm
Height	210.4 mm
Weight	760 g