D-Link DWP-1010 User Manual

Section 3 – Configuration
D-Link DWP-1010 User Manual 16
set by default
Default Gateway
1. IPv4 format.
2. An Optional setting
The gateway setting of the static IP.
Primary DNS
1. IPv4 format.
2. An Optional setting
Assigned DNS server of the static IP.
Secondary DNS
1. IPv4 format.
2. An Optional setting
Assigned DNS server of the static IP.
Ethernet
Ethernet IP
Item
Value setting
Description
IP
1. IPv4 format.
2. A Must-fill setting
The LAN IP Address of this unit.
Netmask
255.255.255.0 (/24) is
set by default
The Subnet Mask of this unit.
DHCP Server
The box is checked by
default.
Click Enable to activate DHCP Server.
DHCP Setting
N/A
Click DHCP Config to configure the DHCP Setting.

D-Link DWP-1010 Specifications

General

Plug and Play	Yes
Networking standards	IEEE 802.3at, IEEE 802.3i, IEEE 802.3u
Ethernet LAN data rates	1000, 2500 Mbit/s
Ethernet LAN interface type	Multi-Gigabit Ethernet
Product type	-
Product color	White
LED indicators	Status
International Protection (IP) code	IP67
Power source type	PoE
4G standard	LTE
SIM card type	MicroSIM
Mobile network generation	5G
Antennas quantity	6
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	10 - 95 %
Sustainability certificates	CE
USB port	No
Ethernet LAN (RJ-45) ports	1
WLAN data transfer rate (max)	- Mbit/s
Cables included	AC, LAN (RJ-45)
Compatible operating systems	Andorid, iOS Windows, Mac, Linux

Weight and Dimensions

Depth	144.8 mm
Width	105.4 mm
Height	210.4 mm
Weight	760 g