EasyManuals Logo

D-Link DWR-932M User Manual

D-Link DWR-932M
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
1.7 Sleep Mode
When no devices are connected to the Wi-Fi hotspot for a certain
period of time, the device will enter sleep mode.
Section 2 - Installation Instructions
2.1 Installation of the Micro-SIM card, TF card
and Battery
Open the back cover of the device.
Remove the battery carefully.
Put the Micro-SIM card into the SIM slot into the slot, be mindful of
the direction.
Put the battery back and cover back on the equipment and close it.
2.2 Power ON/ OFF
Power ON: Long press the POWER Button for 5 seconds to turn on
the device, the battery light will light up.
Power OFF: Long press the POWER Button to turn the device off.
2.3 Charging
The equipment can be charged via either charger or USB port.
If the Mobile Wi-Fi has not been used for a long time or if the battery
is fully depleted, the Mobile Wi-Fi may not power on immediately
after the charger is plugged in. Please charge the battery for a while
before attempting to power on the Mobile Wi-Fi.
Method 1: Use the charger to charge the device
• Only use chargers compatible with the Mobile Wi-Fi and provided
by a designated manufacturer. Use of an incompatible charger or
one from an unknown manufacturer may cause the Mobile Wi-Fi to
malfunction, fail, or could even cause a fire. Such use voids all
warranties, whether expressed or implied, on the product.
The charger is an optional accessory. If it is not included in the
package, you may conta
ct an authorized dealer to buy a charger
compatible with the Mobile Wi-Fi.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DWR-932M and is the answer not in the manual?

D-Link DWR-932M Specifications

General IconGeneral
BrandD-Link
ModelDWR-932M
CategoryNetwork Router
LanguageEnglish

Related product manuals