10
2. Installation
1. Insert the SIM card provided by your 4G mobile network operator.
2. Insert the antennas into the antenna
connectors on the DWR-966. Rotate the
connector end of the antenna to fasten it.
3. Insert the Ethernet cable into one of the LAN ports on the rear
panel of the DWR-966. Insert the other end of this Ethernet cable
into the port of the computer. You can also use the default network
password to connect Wi-Fi devices to the DWR-966 directly. The
default SSID and network password is listed on the label attached
to the rear panel of the DWR-966.
To Next Page
Loading...
