28
Wi-Fi WPS
Wi-Fi Protected Setup (WPS): WPS is a computing standard for easy
and secure setup of a wireless connection. In this section you can
enable WPS for a client connection using WPA2 security.
1. Check the box to enable WPS.
2. Select the SSID of the wireless network you are establishing a
connection with via WPS.
3. Click Apply to apply the changes, or click Reset to undo your
configurations.
Push Button Connect (PBC): If other wireless devices support the PBC
WPS function, click on Click for PBC and then push the WPS button on
the other device.
To Next Page
Loading...
