D-Link EasySmart DES-1100-16 - Rear Panel

D-Link Web Smart Switch User Manual
Po
wer LED: The Power LED lights up when the Switch is connected to a power source.
Link/Act/Speed LED (Ports 1-24):
Flashing: Indicates a network link through the corresponding port.
Blinking: Indicates that the Switch is either sending or receiving data to the port.
Green: Indicates that the port is running at 100M.
Light off: Indicates that the port is running at 10M.
Reset: Press the reset button to reset the Switch back to the default settings. All previous changes will be
lost.
Rear Panel
Figure 4 – DES-1100-24 Rear Panel
Power: Connect the supplied AC power cable to this port.
3
3