D-Link EasySmart DES-1100-24 - VLAN - Management and Port-Based VLAN; Management VLAN Configuration; Port-Based VLAN Setup

D-Link Web Smart Switch User Manual
Figure 52 – VLAN > 802.1Q VLAN > VLAN Table
NOTE: When 802.1Q VLAN is enabled, the Port-
Based VLAN settings will be reset to default.
NOTE: When 802.1Q VLAN is disabled, its
settings will be cleaned, and Management VLAN
will be disabled simultaneously.
VLAN > 802.1Q Management VLAN
802.1Q Management VLAN setting allows you to transfer the authority of the switch from the default VLAN to
others created by users. Doing so makes managing the whole network more flexible.
By default, the Management VLAN is disabled. You can select any existing VLAN as the management VLAN
when this function is enabled.
Figure 53 – VLAN > 802.1Q Management VLAN
NOTE: The Management VLAN can only work
when 802.1Q VLAN is enabled. Please check out
the 802.1Q VLAN state before enabling
Management VLAN.
VLAN > Port-Base VLAN
Port-Based VLANs are the simplest and most common form of VLAN. It assigns the appliance LAN ports to
VLANs, effectively transforming the appliances. You can assign multiple ports to the same VLAN, or each
port to a separate VLAN.
Figure 54 – VLAN >Port-Based VLAN Settings
3
3
1
1