D-Link EBR-2310 - Page 16

16D-Link EBR-2310 User Manual
Section 3 - Conguration
If you selected Dynamic, you may need to enter the MAC address of the computer that
was last connected directly to your modem. If you are currently using that computer,
click Clone Your PC’s MAC Address and then click Next to continue.
The Host Name is optional but may be required by some ISPs. The default host name
is the device name of the Router and may be changed.
If you selected PPPoE, enter your PPPoE username and password. Click Next to
continue.
Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS
server addresses.
Note: Make sure to remove your PPPoE software from your computer. The software is no
longer needed and will not work through a router.