D-Link EBR-2310 - Assigning a Static IP Address

74D-Link EBR-2310 User Manual
Appendix A - Assigning a Static IP Address
Assigning a Static IP Address
(Windows
®
2000/XP)
Note: Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Conguration
Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions:
• Go to Start
• Click on Control Panel
• Double-click on Network Connections