D-Link EBR-2310 - System Settings

59D-Link EBR-2310 User Manual
Section 3 - Conguration
Use this option to save the current router conguration settings to a
le on the hard disk of the computer you are using. First, click the Save
button. You will then see a le dialog, where you can select a location
and le name for the settings.
Use this option to load previously saved router conguration settings.
First, use the Browse control to nd a previously save le of conguration
settings. Then, click the Load button to transfer those settings to the
router.
This option will restore all conguration settings back to the settings
that were in eect at the time the router was shipped from the factory.
Any settings that have not been saved will be lost, including any
rules that you have created. If you want to save the current router
conguration settings, use the Save button above.
Click to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot Device:
System Settings