D-Link GoSwitch5G/GoSwitch8G Unmanaged Gigabit Ethernet Switch
iv
Preface
The GoSwitch5G/GoSwitch8G Manual is divided into sections that describe the system installation and operating
instructions with examples.
Section 1, Introduction - A description of the physical features of the Switch, including LED indicators, ports and
panel descriptions.
Section 2, Installation – A description of the physical installation of the Switch including connecting the Switch to
the network and connecting stacked switch groups.
Section 3, Connecting the Switch – A description of how to connect your Switch to an end node, hub, Switch, or
backbone server.
Appendix A, Technical Specifications - The technical specifications of the GoSwitch5G/GoSwitch8G.
Glossary – Lists definitions for terms and acronyms used in this document.
Intended Readers
The GoSwitch5G/GoSwitch8G Manual contains information for setup and management and of the
GoSwitch5G/GoSwitch8G Switch. This manual is intended for network managers familiar with network management
concepts and terminology.
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your device.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you
how to avoid the problem.
CAUTION: A CAUTION indicates the potential for property damage, personal injury, or death.
To Next Page
Loading...
Need help?
General
