D-Link Mini 3G 21 Mbps - Configure WPA-PSK

42D-Link DWR-710 User Manual
Section 5 - Connecting to a Wireless Network
Congure WPA-PSK
2. Highlight the wireless network (SSID) you would like to connect to
and click Connect.
1. Open the Windows
®
XP Wireless Utility by right-clicking on the
wireless computer icon in your system tray
(lower-right corner of screen). Select View Available Wireless
Networks.
It is recommended that you enable WPA on your wireless router or access point before conguring your wireless adapter. If you are joining an
existing network, you will need to know the WPA key being used.