45D-Link DWR-710 User Manual
Section 6 - Troubleshooting
• Congure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to
restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing
is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open
the login page for your the web management.
• If you still cannot access the conguration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try
accessing the conguration. If you have multiple computers, try connecting using a dierent computer.
2. How can I upgrade the rmware on the device?
To update the rmware on the DWR-710, follow the steps earlier in this document to use the Web GUI for a simplied process. For additional help
or to locate the latest rmware updates and information please visit the ocial web site.