D-Link mydlink DSP-W215 Quick Install Guide

Before you Begin
Plan the location of your Smart Plug devices:
1. Connect Smart Plug devices into electrical outlets that are not
controlled by a wall switch. This will help you to avoid accidentally
turning o power to the device.
2. Verify that your Smart Plug devices are electrically rated to operate with
the power available in your location.
3. Be sure to plug the power cables into properly grounded electrical
outlets in order to help prevent against electrical shock.
Safety
1. Do not open the device or attempt to repair or service it.
2. Use the device in a dry location, and avoid placing it in a humid environment.
3. Do not submerge the device in liquid or attempt to clean it with liquids or
solvents. To clean the device, disconnect from the power outlet and use a
damp towel.
4. This device should only be used indoors.
3

D-Link mydlink DSP-W215 Specifications

Power

input voltage	100 to 240 V
power consumption	Maximum 5 W

Operating Environment

operating temperature	0 to 40 °C (32 to 104 °F)
storage temperature	-20 to 65 °C (-4 to 149 °F)
operating humidity	10% to 90% non-condensing
storage humidity	5% to 95% non-condensing

Weight and Dimensions

dimensions	117 x 66 x 39 mm (4.6 x 2.6 x 1.55 inches)
weight	125 grams (4.41 ounces)