D-Link ShareCenter DNS-320 User Manual

158D-Link ShareCenter DNS-320 User Manual
Section 4 - Conguration
System Settings
System Settings provides features to control your DNS-320. Users can restart the NAS, restore the system to it’s original state, set idle times, shutdown
the system, congure settings, and congure system temperature settings.
Restart: Click to reboot the DNS-320.
Default: Click to restore the device back to the factory
default settings. All previous settings that have been
congured will be erased.
Shutdown: Click to turn o the DNS-320.
Conguration
Settings:
Click on the Save button to save the current
conguration settings to a le on your computer. If
at a later time you need to reload this conguration
after a system reset, browse to the le and click Load.
Idle Time: Enter the time (in minutes) that the administrator and
users will be allowed to remain idle while accessing
the web UI.
System
Temperature
Threshold:
Here you can configure the system temperature
threshold value. This value can be set in Fahrenheit
or Celsius. The device will automatically shutdown
when it reaches the temperature set here.

D-Link ShareCenter DNS-320 Specifications

General

Device Type	NAS server
Drive Bays	2
Connectivity	Gigabit Ethernet
USB Ports	1 x USB 2.0
Supported Drive Types	SATA I/II
RAM	128 MB
RAID Support	JBOD, RAID 0, RAID 1
Features	FTP Server
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing