9
Once you have successfully logged in, the device status page will appear.
(Figure 4)
Setup Menu
All configuration options on the switch are accessed through the Setup
menu on the left side of the screen (Figure 5). Click on the setup item
that you want to configure. The menu contains the following options:
System Setting, Trap Setting, Port Setting, SNMP Setting, Password
Access Control, 802.1Q VLAN, Trunking, IGMP Snooping, 802.1D
Spanning Tree, Port Mirroring, 802.1p Default Priority, Safeguard Engine,
Broadcast Storm Control, 802.1X Setting, Static MAC, Dynamic
Forwarding Table and Statistics. (Figure 5).
Figure 5
Fi
To Next Page
Loading...
