xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
delete access_profile
Purpose Used to delete a previously created access profile.
Syntax
delete access_profile profile_id <value 1-6>
Description The delete access_profile command is used to delete a
previously created access profile on the Switch.
Parameters
profile_id <value 1-6> − Enter an integer between 1 and 8 that is
used to identify the access profile that will be deleted with this
command. This value is assigned to the access profile when it is
created with the create access_profile command.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the access profile with a profile ID of 1:
DGS-3400:4# delete access_profile profile_id 1
Command: delete access_profile profile_id 1
Success.
DGS-3400:4#
show access_profile
Purpose Used to display the currently configured access profiles on the Switch.
Syntax
show access_profile {profile_id <value 1-6>}
Description
The show access_profile command is used to display the currently configured
access profiles.
Parameters
profile_id <value 1-6> − Enter an integer between 1 and 6 that is used to identify
the access profile that will be viewed with this command. This value is assigned
to the access profile when it is created with the create access_profile
command.
Entering this command without the profile_id parameter will command the
Switch to display all access profile entries.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display all of the currently configured access profiles on the Switch:
160
To Next Page
Loading...
