xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
clear arptable
Purpose Used to remove all dynamic ARP table entries.
clear arptable
This command is used to remove dynamic ARP table entries from
the Switch’s ARP table. Static ARP table entries are not affected.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Syntax
Description
Example Usage:
To remove dynamic entries in the ARP table:
DGS-3400:4#clear arptable
Command: clear arptable
Success.
DGS-3400:4#
181
To Next Page
Loading...
