xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
disable rmon
Purpose Used to disable RMON on the Switch.
Syntax
disable rmon
Description This command is used, in conjunction with the enable rmon
command above, to enable and disable remote monitoring (RMON)
on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable RMON:
DGS-3400:4#disable rmon
Command: disable rmon
Success.
DGS-3400:4#
45
To Next Page
Loading...
