xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
37
Web Pages
When connecting to the management mode of the Switch with a web browser, a login screen is displayed. Enter a user name and
password to access the Switch's management mode.
Below is a list of the main folders available in the web interface:
Administration – Contains the following menu pages and sub-directories: IP Address, Interface Settings, Stacking, Port
Configuration, User Accounts, Password Encryption, Port Mirroring, System Log, System Severity Settings, SNTP Settings,
MAC Notification Settings, TFTP Services, Multiple Image Services, Ping Test, IPv6 Neighbor, Routing Table, Gratuitous ARP
Settings, Static ARP Settings, DHCP Auto Configuration, DHCP/BOOTP Relay, DHCP Server, Filter DHCP Server, BPDU
Tunneling Settings, RSPAN, SNMP Manager, PoE, sFlow, IP Multicast VLAN Replication and Single IP Management Settings.
L2 Features – Contains the following menu pages and sub-directories: VLAN, Trunking, IGMP Snooping, MLD Snooping,
Loopback Detection Global Settings, Spanning Tree, Forwarding & Filtering, LLDP and QinQ.
QoS – Contains the following menu pages and sub-directories: Bandwidth Control, QoS Scheduling Mechanism, QoS Output
Scheduling, 802.1p Default Priority and 802.1p User Priority.
ACL – Contains the following menu pages and sub-directories: Time Range, Access Profile Table, ACL Flow Meter and CPU
Interface Filtering.
Security – Contains the following menu pages and sub-directories: Authorization Network State Settings, Traffic Control, Port
Security, IP-MAC-Port Binding, 802.1X, Web Authentication, Trust Host, Access Authentication Control, MAC Based Access
Control, Safeguard Engine, Traffic Segmentation, SSL, SSH, Common Authentication and JWAC.
Monitoring – Contains the following menu pages and sub-directories: Device Status, Module Information, CPU Utilization, Port
Utilization, Packets, Errors, Packet Size, Browse Router Port, Browse MLD Router Port, VLAN Status, VLAN Status Port, Port
Access Control, MAC Address Table, IGMP Snooping Group, MLD Snooping Group, Switch Logs, Browse ARP Table and
MAC Based Access Control Authentication Status.
Save Services – Contains the following menu pages and sub-directories: Save Changes, Configure Information and Current
Configuration Settings.
Reset, Reboot System and Logout menu links are displayed in the main directory.
NOTE: Be sure to configure the user name and password in the User
Accounts menu before connecting the Switch to the greater network.
To Next Page
Loading...
