dacell SM-110 - Page 4

10. Trouble shooting and correction
problem cause correction
Display
drifts
* Defective Sensor
* AC noise in power line
* Defective connection
to sensor (Noise)
* Input filter set incorrectly
* Check sensor state and output
*Checkpowerlineand
connection
* Check connection to
sensor
* Check filter DIP switch
*6-2)checkdisplaytime
* 6-3) Change to AV mode
Display
19999 only
* Discordance between
sensor output and
DIP
S/W setting
* Open and short of
sensor in/output line
* Check DIP switch about
sensor output
* Check sensor wiring
Display
change --
*Exchangeofsensor
input line.
* data setting error
* Check sensor connection.
* refer to 6-3)
Not able to
select
FS,DP,CAL
* Data Protection * Turn off data protection
refer to 3- 4)
Analog output
Problem
* Defective voltage and
current signal
*Difficultyofsetting
*When0 5Voutputis～
required.
* Check DIP Switch 5
*AdjustzeroandspanVR
refer to 2-3)
* Connect 1/4W 500Ω
accuracy resistor between
GND and OUT port
* Contact the manufacturer.
Other noise
protection
* Connection noise filter with
AC input line
* Set noise filter to coil in parallel
* Check the shield.
* If you have any questions, please contact the manufacturer.
11. Other Models and Features
Features
Model
Signal Excitation
Analog
output
Output
style
Data
hold
Peak
hold
User
Reset
SM-100
1-3mV/V
*0.5, 10 /V㎷
DC 10V
*DC3V, DC5V
0-5,10V
0,4 - 20mA
Relay
*TR
O O O
SM-10H
1-3mV/V
*0.5, 10 /V㎷
DC 10V
*DC3V, DC5V
0-5,10V
0,4 - 20mA
Relay
*TR
OOO
SM-15
1-3mV/V
*0.5, 10 /V㎷
DC 10V
*DC3V, DC5V
---OO
SM-18
1-3mV/V
*0.5, 10 /V㎷
DC 10V
*DC3V, DC5V
8StepTROPEN
Collector Output
--O
SM-1B
1-3mV/V
*0.5, 10 /V㎷
DC 10V
*DC3V. DC5V
B.C.D Output
TTL Level
O- O
SM-10R
0 - 5,10V
0,4 -20mA
DC10V,24V
*±15V
RS-232C Output
0-10V,4-20mA
Relay
*TR
OOO
SM-200
0 - 5,10V
0,4 -20mA
DC10V,24V
*±15V
0-5,10V
0,4 - 20mA
Relay
*TR
OOO
SM-23
4-20mA
*1 - 5V
DC24V - Relay - - -
SM-25
0 - 5,10V
0,4- 20mA
DC10V,24V
*±15V
---OO
SM-28
0 - 5,10V
0,4- 20mA
DC10V,24V
*±15V
의8Step TROPEN
Collector Output
O- O
SM-2B
0 - 5,10V
0,4- 20mA
DC10V,24V
*±15V
B.C.D Output
TTL Level
O- O
SM-20R
0 - 5,10V
0,4 -20mA
DC10V,24V
*±15V
RS-232C Output
0-10V,4-20mA
Relay
*TR
OOO
Common features : AC 110V or 220V 50-60Hz, Temperature Drift -- 0.02% FS/ ,℃
A/D Sampling 15Times/Sec
Options : SAMPLING TIME -- 30Times/Sec
BCD Output MODEL with OPEN COLLECTOR CONVERT
*markitemsareoptional
* SM-10H : Sampling Time is 1000/sec
Head Office & Factory: DACELL CO.,LTD
681-1 Cheoksan -Ri,Nami-Myeon,Cheongwon-Gun,
CHUNG-BUK, KOREA
TEL) +82-43-260-2242 FAX) +82-43-260-2245